What is this machine used for?
The V986 is a vertical machining center with a 1100 × 800 mm table and X/Y/Z travels of 900/800/600 mm. Its listed maximum table load is 700 kg, with a 11 kW spindle motor and a 24-tool magazine. Compare the standard and optional spindle drives below, then send your workpiece drawing to review fixtures, tool reach and the required configuration.
Plan your machining setup
Will my workpiece and fixture fit?
The table measures 1100 × 800 mm, and X/Y/Z travel is 900/800/600 mm. These figures are separate from the workpiece envelope. Include fixtures, tool length, access and collision clearance when reviewing your drawing.
Which spindle configuration should I compare?
The standard belt-drive spindle is listed at 8000 rpm. The optional direct-drive version is listed at 12000 rpm. The spindle motor is listed at 11 kW. Specify the required drive and cutting operation; these are distinct configurations, not speeds to combine.
What should I check before selecting tools?
The magazine holds 24 tools. The listed maximum tool weight is 8 kg and maximum tool length is 300 mm. Confirm the tooling interface, tool clearances and any restrictions for the selected configuration.
What installation dimensions are listed?
The listed machine dimensions are 3400 mm front-to-back, 3300 mm left-to-right and 2900 mm maximum height. Allow additional access and service space after reviewing the installation layout.
What information is needed for a quotation?
Send your workpiece drawing, material, dimensions, tolerances, machining operations, fixture concept, production quantity and delivery location. State the spindle drive, tools and options you require so that the team can review the configuration.
Specifications are based on Tiezheng technical documentation reviewed on 13 October 2026. Confirm the selected configuration in the final quotation.