What is this machine used for?
The TF200 is a twin-spindle CNC lathe with separately listed S1/S2 spindle specifications. The listed maximum turning diameter is 280 mm, with X/Z travels of 350/800 mm. Axis travel does not establish an approved workpiece length. Review chuck engagement, the operation sequence and the actual part-transfer arrangement with engineering; material compatibility and automated loading are not implied by the two-spindle layout.
Discuss this configuration View specifications
Check the configuration against your part
Review S1 and S2 specifications without assigning a left/right location that is not confirmed. Define which operations occur at each spindle and how the part is supported or transferred. The two-spindle layout does not prove automatic part transfer or loading. Provide the drawing, required machining length and operation sequence for a focused engineering review.
Configuration and acceptance
The listed values describe documented specifications; they do not establish the complete standard supply. Confirm the CNC, tooling, workholding, spindle duty and acceptance conditions in the quotation. Optional items require explicit selection.
Axis travel is not guaranteed workpiece clearance. Machine positioning and repeatability figures do not guarantee finished-part tolerances. Review the drawing, material, fixture and inspection method together.
Before choosing this machine
Which limits should I check for my workpiece?
Review S1 and S2 specifications without assigning a left/right location that is not confirmed. Define which operations occur at each spindle and how the part is supported or transferred. The two-spindle layout does not prove automatic part transfer or loading. Provide the drawing, required machining length and operation sequence for a focused engineering review.
Does this page confirm a material or automated loading system?
No material or loading-system compatibility is confirmed here. Tell us the material, part form and loading requirement so the team can review the proposed configuration.
What should I send with an inquiry?
Send the drawing or part dimensions, material and operations required. Add the quantity, critical tolerances and loading preference if known. Use the inquiry link on this page to include the model with your request.
Do the specifications define the complete standard supply?
No. A listed specification does not establish the complete standard supply. Confirm the selected CNC, spindle duty, toolholding, workholding and any optional items in the final quotation.