What is this machine used for?
DA560 is a high-speed engraving and milling machine with a 500 × 650 mm table, 500 × 650 × 250 mm X/Y/Z-axis travels and a stated maximum table load of 400 kg. The spindle speed is specified at 18000 rpm. Review the part, fixture, tooling and material together; these figures do not guarantee a finished-part envelope or tolerance.
Which work should I discuss?
Describe the surfaces, part dimensions and mass, clamping method, tools and quantity. The part, fixture and tool assembly must be checked together; material grade and critical features are confirmed for the intended process.
Confirm the supplied configuration
The tool-magazine system is optional. Its listed BT30 spindle interface, disc-type magazine and six-tool capacity describe that optional arrangement, not the supplied baseline. Confirm the required spindle, collet interface and tool-changing configuration for the order. Tool-magazine capacity does not establish automatic part loading.
Read the operating limits separately
Axis travel and table size are separate specifications, not guaranteed machining space. The minimum input increment is a command characteristic, not a finished-part tolerance. Review workholding, cutting conditions, utilities and access with your representative.
Talk to your representative
Start with the part or operation you want to discuss. Selecting a model and providing a drawing are optional for a first inquiry. Your representative confirms the formal configuration, delivery arrangements and quotation directly. Confidential drawings can be exchanged through an agreed channel after contact.
Questions before choosing this machine
Does the table size guarantee that my part will fit?
No. Check the complete part, fixture and tool assembly against travel, clearances, table load and the intended operation.
Which configuration should I confirm?
The tool-magazine system is optional. Its listed BT30 spindle interface, disc-type magazine and six-tool capacity describe that optional arrangement, not the supplied baseline. Confirm the required spindle, collet interface and tool-changing configuration for the order. Tool-magazine capacity does not establish automatic part loading.
Can it machine my material?
Share the material grade, operation, tooling and critical features. A spindle-speed or motor-power figure alone does not establish suitable cutting conditions or a guaranteed result.
Does automatic tool changing mean automatic part loading?
No. Tool changing and part handling are different functions. Loader or robot interfaces, fixtures, safeguarding and unattended operation require separate engineering confirmation.
Do I need an exact model or drawing to make contact?
No. Describe your part or operation to begin. The model, drawing and detailed configuration can be discussed with your representative after first contact.
Discuss this machine Explore machining requirements
