What is this machine used for?
The DQ2200 is a drum-type engraving and milling machine with a 2600 × 600 mm table, a 2200 × 600 mm machining range and 400 mm of vertical Z travel. Maximum table load is 1500 kg. Review these dimensions with your workpiece and fixture, then request a configuration matched to your machining requirements.
The tool magazine is optional. Parameters labelled “Optional tool magazine” describe that optional system; confirm the selected arrangement in your quotation.
Plan your engraving and milling setup
What table size and machining range does this model have?
The DQ2200 table measures 2600 × 600 mm, and the listed machining range is 2200 × 600 mm. Z-axis vertical travel is 400 mm. Machining range is not a statement of individual X/Y-axis travel or maximum workpiece size; check the fixture, tool approach and clearance.
What table load and installation dimensions should I check?
Maximum table load is 1500 kg. Listed length and width are 3300 × 1900 mm, maximum height is 2700 mm and approximate machine weight is 5.5 t. Review the workpiece and fixture together and confirm the installation route and floor requirements.
Which spindle and feed details are available?
The specification identifies an electric spindle. G00 rapid traverse is 24/24 m/min for X/Z, and G01 cutting feed is 0–10000 mm/min. Confirm spindle power, speed, tool interface and the selected arrangement in the quotation; no Y-axis feed figure is stated here.
Is the tool magazine included as standard?
The tool magazine is listed as optional. Its arm-type system has a listed tool change time of 2.2 s, maximum tool weight of 4 kg and maximum tool length of 100 mm. Confirm the selected magazine, capacity and tool-change arrangement for your order.
What should I send for a quotation?
Send the workpiece drawing, material, dimensions, tolerances, fixture concept, tooling requirements, production quantity and delivery location. Include any requirement for an optional tool magazine so the team can review the application and agree the configuration.
Specifications are based on Tiezheng technical documentation reviewed on 10 October 2026. Confirm the selected machine configuration in the final quotation.