Machine specification

Tiezheng FM1400 Gantry Five-Axis Machining Center

Still choosing a model? Describe your part or operation. A model or drawing is not required for first contact.

The Tiezheng FM1400 is a five-axis machining center documented with a 1,400 mm rotary table and 1,600 / 1,900 / 1,250 mm X/Y/Z travel. Key specifications for this model are listed below. Spindle, accuracy, tool-magazine capacity, control and optional equipment are confirmed for the selected configuration during drawing-led RFQ review.

Request a machine quote View specifications

Product media FM-series configuration illustration. The supplied configuration is confirmed during inquiry; this is not an exact-model photograph.

Review FM1400 for your part

For parts requiring access from several directions, compare the published linear and rotary axes, table, load and tool-clearance limits for this exact model. Confirm whether the supplied control and configuration support indexed operations, simultaneous five-axis machining or both. Check the fixture, collision limits and postprocessor for the intended part; the family label is not a complete process approval.

Published comparison figures

Rotary table diameter: 1400 mm
T-slot number and width: 8 x 22 H8 slots x mm
X-axis maximum travel: 1600 mm
Y-axis maximum travel: 1900 mm

Start with your part

Describe the part or operation you know; a model and drawing are optional for first contact. Add material, critical tolerances and quantity if available.

Discuss this model

Compare this model with alternatives

What to include in your inquiry

Confirm inspection, delivery, installation, training and after-sales responsibilities in the proposal. Review delivery and support scope

Key specifications

Rotary table diameter	1400 mm
T-slot number and width	8 x 22 H8 slots x mm
X-axis maximum travel	1600 mm
Y-axis maximum travel	1900 mm
Z-axis maximum travel	1250 mm
Spindle nose to table surface distance	750 mm
X-axis rapid traverse	48 m/min
Y-axis rapid traverse	48 m/min
Z-axis rapid traverse	48 m/min
Tool magazine type	Disc type
Maximum tool weight	8 kg
Maximum tool diameter with adjacent tools loaded	50 mm
Maximum tool diameter with adjacent pocket empty	100 mm
Lubricating oil capacity	4 L
Power supply capacity	45 kW
Coolant tank capacity	550 L
Machine length	5200 mm
Machine width	3300 mm
Machine height	3600 mm

What is the Tiezheng FM1400?

The FM1400 is a five-axis machining center for drawing-led projects that fit its documented rotary-table and travel envelope. The table below lists the currently available specifications for buyer comparison. Additional configuration details are confirmed during RFQ review.

What working envelope is documented?

The FM1400 specifications include a 1,400 mm rotary table, 1,600 mm X-axis travel, 1,900 mm Y-axis travel, 1,250 mm Z-axis travel and a 750 mm spindle-nose-to-table distance.

Which details are confirmed during RFQ review?

Spindle data, positioning and repeatability requirements, tool-magazine capacity, machine weight, maximum tool length, control choices and optional equipment are confirmed for the selected configuration during RFQ review.

What should a buyer send for an FM1400 RFQ?

Send the part drawing, material, critical tolerances, workholding concept, annual volume, target cycle time, preferred control, tooling requirements, automation scope, electrical standard and destination country.

Can these values replace engineering confirmation?

No. They support initial comparison and RFQ preparation. The final technical agreement must confirm the complete configuration, process capability, utilities and delivery scope.

Technical documents

Which documents should buyers review?

Request the latest configuration details, drawing review and applicable technical documents with your RFQ.

Related decision pages

Where should buyers go next?

Configuration review

Check this model against your part and production target

Start with the part dimensions or operations you know. A drawing is optional for the first inquiry. Share material, critical tolerances, volume and automation needs when available; our team will confirm configuration and acceptance requirements before quotation.

Start model RFQ