What is this machine used for?
The MB14-2016 gantry machining center has a 2000 × 1400 mm table, X/Y/Z travels of 2000/1600/800 mm and a listed maximum table load of 6 t. Its gantry width is 1600 mm and spindle motor power is 18.5 kW. Compare these limits with your workpiece, fixture and tool access, then confirm the spindle and magazine configuration for your machining process.
Evaluate your workpiece and setup
For plates, bases and large components, first compare the table dimensions and load with the complete fixture assembly. Then check axis travel, the space below the crossrail and tool access. Application suitability depends on the material, tolerances and cutting operations; a dimensional match alone does not establish process capability.
Questions before choosing MB14-2016
Will my workpiece and fixture fit?
The table is 2000 × 1400 mm and X/Y/Z travel is 2000/1600/800 mm. The listed gantry width is 1600 mm. These are separate machine dimensions, not a guaranteed workpiece envelope. Send the fixture layout and tool lengths so the team can check clearance and collision risks.
How should I interpret the table load?
The listed maximum table load is 6 t. Include the workpiece and fixture when reviewing the setup. Confirm the load distribution, centre of gravity and required support with the technical team before ordering.
Which spindle configuration is suitable?
The standard belt-drive spindle is listed at 6000 rpm; the optional direct-coupled configuration is listed at 8000 rpm. Spindle motor power is 18.5 kW. These are distinct drive configurations. Specify the material, tool sizes and operations so the appropriate configuration can be confirmed.
What tooling and magazine details should I confirm?
The listed maximum tool weight is 15 kg and tool length is 350 mm. Optional chain-magazine capacity alternatives are 32/60/90 tools. Confirm the meaning of full/empty for the listed maximum tool diameter, the selected capacity, tool interface, tool clearance and change-time conditions; the alternatives are not a combined capacity.
What is needed for installation planning and a quote?
The listed machine length and width are 6800 × 4500 mm, maximum height is 4800 mm and approximate weight is 20 t. Review the installation drawing for foundation, access and maintenance space. Send your part drawing, material, tolerances, batch size, fixture concept and delivery location for a configuration review.
Specifications follow Tiezheng technical documentation reviewed on 13 October 2026. Confirm the selected configuration and acceptance conditions in the final quotation.
Review your workpiece and request a quote