What is this machine used for?
The MB32-8040 gantry machining center has a 8000 × 3200 mm table, X/Y travels of 8200/4200 mm, listed Z-axis travel alternatives of 1250/1500 mm and a listed maximum table load of 42 t. Gantry width is 4000 mm and spindle motor power is 22 kW. Compare these dimensions with the complete fixture and tool setup, then confirm the selected spindle drive and Z-axis configuration for your process.
Z-axis travel is listed as 1250/1500 mm. These are configuration alternatives; the source does not assign them to a specific included configuration. Spindle-nose distances also list alternatives that require confirmation. Specify the required Z travel and clearances in the inquiry and confirm them in the quotation.
The optional direct-drive speed is listed as 4000/6000 rpm. These are listed alternatives, not two simultaneously supplied spindle speeds. Confirm the selected spindle specification in the quotation.
Evaluate your workpiece and setup
For plates, bases and large components, first compare the table dimensions and load with the complete fixture assembly. Then check axis travel, the space below the crossrail and tool access. Application suitability depends on the material, tolerances and cutting operations; a dimensional match alone does not establish process capability.
Questions before choosing MB32-8040
Will my workpiece and fixture fit?
The table is 8000 × 3200 mm and X/Y travel is 8200/4200 mm; listed Z-axis travel alternatives of 1250/1500 mm. Gantry width is 4000 mm. These are separate machine dimensions, not a guaranteed workpiece envelope. Send the fixture layout and tool lengths for clearance and collision review.
How should I interpret the table load?
The listed maximum table load is 42 t. Include the workpiece and fixture when reviewing the setup. Confirm the load distribution, centre of gravity and required support with the technical team before ordering.
Which spindle configuration is suitable?
The standard belt-drive spindle is listed at 4000 rpm; the optional direct-drive configuration is listed at 4000/6000 rpm. Spindle motor power is 22 kW. These are distinct drive configurations. Specify the material, tool sizes and operations so the appropriate configuration can be confirmed.
What tooling and magazine details should I confirm?
The listed maximum tool weight is 15 kg and tool length is 350 mm. Optional chain-magazine capacity alternatives are 32/60/90 tools. Confirm the meaning of full/empty for the listed maximum tool diameter, the selected capacity, tool interface, tool clearance and change-time conditions; the alternatives are not a combined capacity.
What is needed for installation planning and a quote?
The listed machine length and width are 20000 × 7500 mm, maximum height is 6200 mm and approximate weight is 106 t. Review the installation drawing for foundation, access and maintenance space. Send your part drawing, material, tolerances, batch size, fixture concept and delivery location for a configuration review.
Specifications follow Tiezheng technical documentation reviewed on 15 October 2026. Confirm the selected configuration and acceptance conditions in the final quotation.
Review your workpiece and request a quote