What is the Tiezheng VW100D?
The VW100D is part of Tiezheng’s VW-series machining-center range. Its key specifications cover worktable, load, supported workpiece dimensions, spindle, tooling, motion, utilities and machine envelope for initial comparison. Configuration details are confirmed during drawing-led RFQ review, and the final supply scope is defined in the signed technical agreement.
Which worktable and workpiece limits are documented?
The catalog lists a 1000 x 1000 mm worktable, 2200 kg maximum worktable load and a 900 / 1500 mm maximum workpiece height / diameter entry. Confirm fixture height, rotary clearance, tool access, support and the paired-value interpretation against the actual part drawing.
Which spindle, tooling and motion values can be screened?
The published specifications list a BT50 tool holder, 6000 rpm catalog-listed standard vertical / horizontal spindle speed, 18.5 / 18.5 kW spindle motor power, 24 / 24 tool positions and 24/24/24 m/min X/Y/Z rapid traverse. Final spindle, magazine and axis configuration remains subject to RFQ confirmation.
Which details require RFQ confirmation?
Confirm directional work-envelope values, spindle-to-table ranges, custom division, tool diameter, servo values, pressure, optional spindle and chip-removal methods, magazine structure and controller architecture for the selected configuration during RFQ review.
How should buyers compare the VW100D?
Use the documented table, load, workpiece entry, spindle, tooling, traverse, utility and installation rows for initial screening, then confirm clearances and the complete machine configuration through RFQ.
What should be sent for a VW100D RFQ?
Send 2D and 3D part drawings, material, hardness, machining allowance, critical tolerances, surface finish, workpiece mass and envelope, annual volume, target cycle time, required operations, control and spindle requirements, tooling, workholding, automation, coolant and chip-handling needs, electrical standard, acceptance method and destination country.