What is this machine used for?
The WD2016C is a horizontal machining center with a 2200 × 1300 mm fixed table and X/Y/Z travels of 2000/1600/600 mm. Its listed fixed-table load capacity is 20 t, with a 22 kW spindle motor and a 0–3000 rpm spindle speed range. Send your workpiece and fixture drawings to review clearances, tooling and the required machine configuration.
Plan your milling setup
What are the table and axis travel dimensions?
The fixed table measures 2200 × 1300 mm. X, Y and Z travels are 2000, 1600 and 600 mm respectively. Axis travel does not define the maximum workpiece envelope; fixture height, tool reach and collision clearance must also be checked.
What spindle figures should I compare?
The spindle motor is rated at 22 kW and the listed speed range is 0–3000 rpm. The drive is specified as direct drive plus gearbox. Confirm the tooling interface and cutting requirements for the selected configuration.
What feed rates are listed?
G00 rapid traverse is 10/10/12 m/min for X/Y/Z. G01 cutting feed is 1–10000 mm/min. Select cutting parameters according to the material, tool and operation.
What installation space should I plan for?
Machine dimensions are listed as 4000 mm front-to-back, 4000 mm left-to-right and 4500 mm maximum height. Approximate machine weight is 19 t. Allow additional space for access, maintenance and material handling after reviewing the installation layout.
What information is needed for a quotation?
Send a workpiece drawing, material, dimensions, tolerances, fixture concept, machining operations, production quantity, required configuration and delivery location. The team can then review your application and prepare a quotation.
Specifications are based on Tiezheng technical documentation reviewed on 11 October 2026. Confirm the selected machine configuration in the final quotation.